Cleaner walls - Liquid

Description: It is particularly suitable for removing organic, mineral and limestone deposits installed in the pool during normal use. Suitable for use inside and outside the pool and compatible with almost all types of surfaces, such as stainless steel, tiles, cement, iron, stoneware, metals, plastics, painted surfaces, etc.




Instructions for use: To clean the pool after draining, apply the product undiluted to the walls and bottom of the pool. Then wait 30 minutes for it to take effect and rinse with plenty of water. Apply the product with a non-mist sprayer or with a watering can, in an amount of about 5 liters per 25 m 3 of pool volume.



81004 - ECOPOOL - WALL CLEANER
Descaling liquid cleaner for surfaces.

Ideal for: All types of swimming pools for cleaning the tank and stone or sand filters.

Added value: ECOPOOL detergent specifically designed to remove limescale, organic waste and mineral deposits that form and adhere to pool surfaces over time.

It is a product for cleaning the pool tank and the inside of plastic filters.

Directions for use : In an empty swimming pool Apply the product ECOPOOL WALL CLEANER undiluted to the surfaces to be cleaned and apply the product well to the walls and floor. Allow the product to soak in for about half an hour and then rinse with plenty of water. If fouling persists, the process must be repeated again. In areas where dirt is very intense, it is advisable to support the effect of the product by rubbing it with a brush.