Heat pump Powerforce - Recambios

22- Engine lower fan

372.200 Ft

A2 48. Control card

131.700 Ft

46- main electronic card A1

234.500 Ft

58- Card A4

49.300 Ft

47- fan electronic card A3 + protection circuit

365.000 Ft

50- crankcase heater 45W Compressor

110.100 Ft

50 circuit protection

202.900 Ft

52- fuse terminal block 5 x 20A

51.700 Ft

The contactor 25 91-

59.700 Ft

Driver stages 90-

60.900 Ft

83/84/85/87 / 88- single probe ST1, ST2, ST3, ST4 and ST5

18.500 Ft

49- EMC filter 6A 250V

114.900 Ft

Varistor (S20K275)

5.700 Ft

Klixon compressor

68.900 Ft

Starter Compressor

779.900 Ft

66b- Compressor Power Force35

2.630.700 Ft

66a- Compressor Power Force35

1.971.600 Ft

69- Condenser Power Force 25 and 35

631.900 Ft

70- Evaporator

3.141.300 Ft

4-way valve 75-

228.500 Ft

73. Expansion valve UKV32D

290.200 Ft

72- Dehydrator 164S

162.100 Ft

71- liquid bottle

206.100 Ft

74. The coil 102 UKV-LG700

88.500 Ft

76- coil 4-way valve 518A1 STEF-01AI

75.300 Ft

Pressure Switch welding bp

36.500 Ft

Pressure switch hp welding

39.700 Ft

9 Front panel

319.000 Ft

8- front panel pressure gauge

146.100 Ft

8- front panel pressure gauge (after Novembro.2015)

135.300 Ft

Side panel 7-

232.500 Ft

Rear panel 6 (2015)

307.800 Ft

Rear panel 6- (after Novembro.2015)

307.800 Ft

Top panel 4- (roof)

175.300 Ft

Separate the body 5-

79.300 Ft

1/2/3 Footer

390.200 Ft

101- collector Cond. Force power (Input)

42.900 Ft

102- collector Cond. Force Force (Output)

42.900 Ft

103- Set of two medium supplies (unit) 32/47 5mm thickness

8.500 Ft

68. Insulation of compressors

161.700 Ft

24. propeller blades 3

100.900 Ft

32- fan protection grille

84.100 Ft

36. Grid 1,350 x 1,490 mm

76.900 Ft

26- fan ring

260.500 Ft

33. Pressure Gauge Adhesive

48.500 Ft

27. Handle plastic gasket +

33.700 Ft

21- ventilation Support

88.100 Ft

Joint letter A2

900 Ft

soporte collecting condenser kit

6.500 Ft

104 / 105- in fitting parts 63 of diameter 3

18.500 Ft

Fitting condenser (water inlet)

11.300 Ft

Hydraulic Fitting - condenser outlet seal supported +

5.700 Ft

Fitting condenser (water outlet)

10.100 Ft

Hydraulic coupler - the condenser inlet sealing +

3.700 Ft

remote control unit

302.200 Ft

Kit PAC net

70.500 Ft

Tray condensation

216.100 Ft