Polyester resin is a product suitable for various types of use, elaboration, manufacture and repair of reinforced parts. (with or without glass fibre) Orthophthalmic accelerated and thixotropic, it is ideal for a large number of applications.

The kit contains

• - 1 kg of accelerated/thixotropic resin.
• - 0,020 g of catalyst.
• - 1 m2 of MAT 300 g/m2.
• - A 1-inch brush.
• - Application instructions.

How to use:

Thoroughly mix the two components (resin and catalyst) in a proportion of 1.5% (summer) and 2.5% (winter) of catalyst in the resin; always taking care to mix only the amount to be used. 

In the case of a laminate, the fiberglass must be previously cut to the shape of the surface to be repaired, duly clean, dry and free of grease.

The accelerated resin is applied on the surface to be repaired with a brush and roller, overprinting both sides of the fibreglass blanket. The resin used will be approximately 1 kg per m2 of fibre, with a drying time of 30 minutes to 2 hours, depending on atmospheric conditions.

If a greater thickness is required, several layers can be applied on top of each other when the previous one is still sticky but without smearing.