Advantages:
Corrects water instability due to low alkalinity (TAC value less than 80 mg/l).
• Its composition of fine granules allows the water to be lifted quickly and efficiently.
• Strengthens water balance, essential for the effectiveness of other treatments.
• Can be used all season and if needed, is essential early in the season when pools are open, particularly in case of pH fluctuations and low alkalinity.
• Packaging: 5 kg.

Directions for use:
Test the alkalinity (TAC value) at least once a year.
• Optimal alkalinity is between 80 and 120 mg/L (8 and 10 °F). At these values, flocculation is optimized and strong pH fluctuations are avoided.
• Dose Alca-Plus directly into the pool water, with the filtration system in operation.
• After treatment, let the filtration system run for 2 to 3 hours, analyze the TAC value and, if necessary, readjust.
• In the case of automatic Alca-Plus dosing, if the TAC value approaches 150 mg/L (15 °F), dosing must be interrupted.
• pH regulation must be discontinued while Alca-Plus is being dosed.

Recommendations: Filtration should be done every day (at least as long as the split water temperature is equal to the temperature). This treatment should be carried out preferably at night, after the last bath of the day.
• After Alca-Plus dosing, an acidic pH correction may be necessary.
• In order to prevent the water from becoming cloudy, do not dose more than 500 gr. per 10 m3 of water.

For all types of filtering (physical treatment).
For all pool sizes.
Where: directly into the water.
When to dose: whenever necessary.
Dosage: apply 180 gr per 10 m3 - to increase TAC by 10 ml/l.