Product information
Brand
RAINBIRD
Plastic angle and globe valves. The most robust and reliable valves in their class
Designed for high-end residential installations and small commercial installations, Rain Bird® PGA Series valves are the most robust and reliable valves in their class . These durable, easy-to-maintain valves are proven to perform excellently, even in environments with harsh temperatures and intense pressure.
Extreme Durability
The PGA valve maintains a strong, trouble-free seal between the body and cover, whatever the conditions. In the temperature cycling test, hundreds of PGA valves were exposed to extreme temperature changes and intense pressures. The result: zero leakage.*
Pressure Resistant Seal
The body seal for the PGA valve cover is designed to overcome the intense water pressure common to many commercial locations. Faced with repeated pressure discharges that easily hit triple digits, our valves outperformed the closest competitor by more than 2½ times to 1 in the pressure cycle test.*
Ease of maintenance
Multi-head screws simplify the maintenance of PGA valves. With a choice of flat, Phillips or hexagonal head, you have the freedom and convenience to carry out your tasks more quickly.*Currently available on 2" PGA models only.
Quiet performance
With its solid electrical design, the PGA valve significantly reduces noise and provides years of reliable operation. So not only will you enjoy peace of mind, you'll have silence and peace of mind.
- Watertight seal between body and cover for maximum reliability even in the most extreme conditions
- Robust construction and electrical design for quiet and reliable operation
- Flow pilot with filter system for increased resistance to debris and clogging
- Slow closure to avoid water hammer effect and consequent damage to the system
- Normally closed and forward flow design is latching solenoid compatible for use with Rain Bird battery-powered controllers
- Multi-head (Phillips, flat head or hex) screws for easy maintenance
- Manual internal bleed operates the valve without allowing water into the valve box. This allows the pressure regulator to be adjusted without turning the valve on the controller
- One-piece solenoid with encapsulated plunger and spring for easy servicing operations. Prevents loss of parts during field service Three-year warranty
- Allows field installation of an optional PRS-D pressure regulator to ensure optimum sprinkler performance
- Latching solenoid compatible for use with Rain Bird battery-powered controllers
Options
- Allows field installation of an optional PRS-D pressure regulator module to ensure optimum rotor performance. Sets up to 100 psi (6,9 bar)
- Compatible with Rain Bird latching solenoid for use with Rain Bird battery-powered controllers up to 150 psi (10,35 bar).
- Compatible with ESP-LXD decoders
Specifications
- Pressure: 15 to 150 psi (1.04 to 10.4 bar)
- Flow without PRS-D option: 2 to 150 gpm (0.45 to 34.05 m³/h; 7.8 to 568 l/m)
- Flow rate with PRS-D option: 5 to 150 gpm (1.14 to 34.05 m³/h; 19.2 to 568 l/ m)
- Water temperature: Up to 110 °F (43 °C) - See table in photo section above
- Ambient temperature: Up to 125 °F (52 °C)
Electrical Specifications
- 24 VAC 50/60 Hz (cycles per second) Solenoid Power Requirements
- Inrush current: 0.41 A (9.9 VA) at 60 Hz
- Holding current: 0.14 A (3.43 VA) at 60 Hz
- Solenoid Coil Resistance: 30 - 39 ohms, nominal
Dimensions
- 150-PGA: 8" x 6¾" x 3½" (20,3 cm) x (17,2 cm) x (8,9 cm)
Produtos recomendados
- Choosing a selection results in a full page refresh.