SVELTÉA Automatic Raised Cover

WHY CHOOSE A HIGH AUTOMATIC COVER
GUARANTEED SAFETY
The SVELTÉA raised automatic cover guarantees optimum pool safety.
- It complies with the NF P90-308 standard depending on the safety system chosen:
- Stainless steel safety system, the cover complies if and only if the inside width of the pool is greater than or equal to 2.30 metres.
- ABS safety system or with a FABRIC handle, the cover complies if and only if the inside width of the pool is greater than or equal to 2 metres.
- Ultra-resistant brackets for fixing to the wall or under coping permanently close and secure the pool. Once fitted, access to the water becomes impossible*.
- Raised covers, once closed, also protect the pool from impurities: leaves, pollen, dust...
- Finally, they provide a thermal barrier: they reduce water evaporation and heat loss.

TECHNICAL AND PRACTICAL ADVANTAGES
Easy to use: Thanks to its tubular motor inserted into the shaft and, with a simple turn of the key or via your smartphone using the Cover Connect APP (optional), the cover easily rolls up and unrolls in an instant Disengageable motor: For greater peace of mind and for the safety of the pool, in the event of a prolonged power failure or any other possible malfunction, the cover can be manually operated.

Peace of mind: Equipped as standard with an end-of-stroke system, once you start closing, the cover automatically stops at the end of the pool.
The Sveltéa model has a contemporary design with an aerodynamic finish.

The combination of its 4 colours has been created in perfect harmony with the white environment: Anthracite, Grey, Blue, White.
And for even greater harmony, the stainless steel safety straps can be matched to the colour of the PVC slats.
The 146 winding shaft is made of anodised aluminium and thermolacquered aluminium supports for greater strength and durability. The rest of the cover is made of ASA, a polymer that is particularly resistant to weather and UV radiation.

The maximum size of the cover is for swimming pools (internal dimensions): 5×10 metres.

MECHANICAL KIT:
Includes the following elements:
- Thermolacquered aluminium supports
- Anodised aluminium shaft.
- Disengageable motor with limit switch.
- Standard 220/24V distribution board with electrolysis contact
- Tool-free quick-connect terminals.
- Key switch, installed on the roof support.

AstralPool's automatic covers use watertight hollow extrusion PVC sheets. End caps welded at both ends ensure the tightness of the slats and the 20cm wide flaps of the cap can ensure the total length of the slat. The tabs can also be 10 or 30 mm, altering the total width of the pool cover.
The blades measure 71.4 mm in length and are 17 mm thick, so they can float. To prevent staining, particularly organic staining, the slats are stabilised with calcium and zinc.

To ensure the cover fits in with its surroundings, various slat models are available: white, sand, grey and medium grey